Palazzetti Twiggy 6kW Utilisation Et Fonctionnement page 21

Display brightness when in standby mode can be set.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d)
The data shown on the display when this is in standby mode can be set.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) Set one of the following values using the
The display remains on the last operation set by the user;
All operating parameters are displayed cyclically;
The room probe temperature is shown
The current time is shown
e) Press
The volume of the buzzer can be set based on requirements:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu [
d)
The type of pellets used can be set:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d) Set one of the following values using the
Long pellet
Small pellet
e) Press
to go to the setup menu
[11]
OFF, 1 ... 5
) using the
to go to the setup menu
[12]
and buttons:
to go to the setup menu
1 3
to go to the setup menu
[ 1 4]
and buttons:
and then press ;
and press
buttons and press
and then press ;
and press
and then press ;
] and press
buttons and press
and then press ;
and press
, If the function
21