Technical Characteristics - Gima SUPER VEGA Mode D'emploi

GB
12. Operation of the device is very simple and therefore no further explanations are required other than those indicated in the
following user manual.
The manufacturer cannot be held liable for accidental or indirect damages should the device be modified,
repaired without authorization or should any of its component be damaged due to accident or misuse.
Any minimal modification / repair on the device voids the warranty and does not guarantee the compliance
with the technical requirements provided by the MDD 93/42/EEC (and subsequent changes) and its
Model
Typology (MDD 93/42/EEC)
Classification UNI EN ISO 10079-1
Main Voltage
Power consuption
Fuse
Maximum suction aspiration (without jar)
Minimum suction aspiration (without jar)
Maximum flow (without jar)
Weight
Dimension
Functioning
Working condition
Conservation and transport condition
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2012/19/UE-WEEE:
The symbol on the device indicates the separated collection of electric and electronic equipment. At the end of
life of the device, don't dispose it as mixed solid municipal waste, but dispose it referring to a specific
collection centre located in your area or returning it to the distributor, when buying a new device of the
sample type to be used with the same functions.
This procedure of separated collection of electric and electronic devices is carried out forecasting a European
environmental policy aiming at safeguarding, protecting and improving environment quality, as well as avoiding potential effects
on human health due to the presence of hazardous substances in such equipment or to an improper use of the same or of parts of
the same Caution: The wrong disposal of electric and electronic equipment may involve sanctions.
normatives.

TECHNICAL CHARACTERISTICS

Room temperature:
Room humidity percentage:
Atmospheric pressure:
Room temperature:
Room humidity percentage:
Atmospheric pressure:
15
SUPER VEGA SUCTION ASPIRATOR
Medical Device Class IIa
HIGH VACUUM / HIGH FLOW
230 V ~ / 50 Hz
110 VA
F 1 x 1.6A L 250 V
-80kPa (- 0.80bar)
Less than -40kPa (-0.40 bar)
40 l/min
6.2 Kg
380 x 920 (h) x 360mm
NON-STOP OPERATED
5 ÷ 35 °C
30 ÷75 % RH
800 ÷ 1060 hPa
- 40 ÷70 °C
10 ÷ 100% RH
500 ÷ 1060 hPa