Technical Characteristics; Cleaning The Main Unit - Gima TOBI Mode D'emploi

The manufacturer cannot be held liable for accidental or indirect damages should the device be modified, repaired without authorization or
should any of its component be damaged due to accident or misuse.
Any minimal modification / repair on the device voids the warranty and does not guarantee the compliance with the technical requirements
provided by the MDD 93/42/EEC Directive and its normatives.
TYPOLOGY (MDD 93/42/EEC)
MODEL
UNI EN ISO 10079-1
POWER FEEDING
POWER CONSUMPTION
FUSE
MAXIMUM SUCTION PRESSURE (without jar)
MAXIMUM SUCTION FLOW (without jar)
WEIGHT
SIZE
DUTY CYCLE (to 35°C and 110% operating voltage)
SICILICONE TUBE SIZE
ACCURANCY OF VACUUM INDICATOR
WORKING CONDITION
CONSERVATION CONDITION AND TRASPORT
Please note technical specifications may vary upon the manufacturer's discretion!
To clean the device external parts always use a cotton cloth dampened with detergent.
Don't use abrasive or solvent detergents.
PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO NOT GET IN TOUCH
During all clearing operations use protection gloves and apron (if need be, also wear a face mask and glasses) to avoid getting in contact with
contaminating substances (after each utilization cycle of the machine).

TECHNICAL CHARACTERISTICS

~
Hz
I
0
II

CLEANING THE MAIN UNIT

WITH LIQUIDS. NEVER CLEAN THE EQUIPMENT WITH WATER.
HIGH VACUUM / HIGH FLOW
Room temperature:
Room humidity percentage:
Altitude:
Room temperature:
Room humidity percentage:
SYMBOLS
Class II isolation equipment
CE marking in conformity with EC directive 93/42/EEC and subsequent
Manufactured by: GIMA S.P.A. - Via Marconi, 1 - 20060 Gessate (MI) - Italy
Warning, consult the instruction manual
To Preserve in place coolness and dry land
Conservation temperature: -40 ÷ 70°C
11
Class IIa Medical Decice
TOBI HOSPITAL
230V~ / 50Hz
300 VA
F 1 x 4A L 250V
-90 kPa (-0.90 Bar)
90 l/min
20 Kg
650 x 550 x 450 mm
Non-Stop Operated
Ø 8 x 14 mm
± 5%
5 ÷ 35°C
30 ÷ 75% RH
0 ÷ 2000m s.l.m.
-40÷ 70°C
10 ÷ 100% RH
changes.
Type B equipment
Fuse
Alternate Current
Mains Frequency
ON
OFF
Remote Control