Baxtran BAT Serie Manuel D'usager page 28

Laboratory scale
4. KEYPAD DESCRIPTION
KEY
Set the zero point for all subsequent weig-
hing. The display shows zero.
Tares the scale. Stores the current weight in
memory as a tare value, substracts the tare
value from the weight and shows the results.
This is the net weight.
Enters the percent weighing function. When
in percentage mode and current value is
zero, press this key to return normal weig-
hing mode.
To print the results to a PC or printer using
the optional RS-232 interface. It also adds
the value to the accumulation memory if the
accumulation function is not automatic.
This key will select either kilograms, pounds,
ounce for the weighing unit when weighing
mode. When counting mode, allows the
weight, unit weight, and count to be seen
when parts counting.
Use this key to enter counting mode when
normal weighing mode.
Use this key to turn on or turn off the power.
Model BAT
PRIMARY FUNCTION
DESCRIPTION
SECONDARY FUNCTION
"Enter" key when setting parameters or other
functions.
"ESC" is to return to normal operation when
the scale is in a parameter setting mode.
A secondary function, change current value
for parameters or other functions.
Use this key to return normal weighing mode
when counting mode.
User's Guide
27