Rs.232 Output; Parameters - Baxtran BAT Serie Manuel D'usager

Laboratory scale
7. RS.232 OUPUT
The BAT series scales can be ordered with an optional RS-232 output.
Speci•cations:
• RS-232 output of weighing data
• ASCII code
• 9600 Baud
• 8 data bits
• No Parity
Connector: 9 pin d-subminiature socket
• Pin 3: Tx (Output)
• Pin 2: Rx (Input) (not used at this time)
• Pin 5: GND
BAT scales can be connected with PC, remote display or mini printer, setup see section 8.

8. PARAMETERS

The scale has 8 parameters that can be set by the user plus a method of entering the calibration section.
To set parameters press the
The display will show the •rst function, "F1 UNIT".
Pressing the key will cycle through the other functions.
Pressing key will allow you to set the function. Use the
Note: when display shows "TECH", press
key, and press
Model BAT
key during self checking.
key to enter technical parameters setting mode.
key to leave a parameter unchanged.
key to enter, display shows "PIN", press
User's Guide
, ,
31