General Installation; Installation Of Bar Series - Baxtran BAR Serie Manuel D'usager

BAR model
3. INSTALLATION

3.1. GENERAL INSTALLATION

The sacles should be sited in a location that will not degrade the accuracy.
Avoid extremes of temperature. Do not place in a direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
Avoid high humidity that might cause condesation. Avoid direct contact with water. Do not spray or immerse the scales
in water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use.

3.2. INSTALLATION OF BAR SERIES

Level the scale by adjusting the four feet. The scale should be adjusted such that the bubble in the spirit level is in the
center of the level and the scale is supported by all four feet. If the scale rocks readjust the feet.
Attach the adapter to the connector on the side of the scale. Please use the power as the label.
For balances with wind shielding, please put wind shielding on the top of balance, just check reading after load weight
and close wind shielding.
4. KEYPAD DESCRIPTION
KEY
Set the zero point for all subsequent
weighing. The display shows zero.
Tares the scale. Stores the current weight in
memory as a tare value, substracts the tare
value from the weight and shows the results.
This is the net weight.
ABS plastic
Housing
1/60.000, 1/150.000
Max. Divisions
AC adapter (9V/800 mA)
Power
Rechargeable battery (6V/1.2Ah)
≤ 1500 = 2'9 kg
Gross weight
≥ 1500 = 2'7 kg
PRIMARY FUNCTION
DESCRIPTION
SECONDARY FUNCTION
"Enter" key when setting parameters or
other functions.
User's Guide
23