3
3
Cylinder installation
3.1 Preparation
The cylinder should only be installed in frost-free areas with
short distances between lines.
A firm, sturdy and flat installation location (substrate) is es-
sential.
Pay attention to the position of the connection openings, es-
pecially on the flange opening when installing the cylinder.
4
Hydraulic connection
4.1 Connection - parallel (use as a pure domestic hot water cylinder)
GB-4
3.2 Transportation
It is important to ensure that the transport route is free of obsta-
cles and trip hazards. The required heights and widths for trans-
porting the cylinder into the building can be inferred from the
technical data. The tilting dimension of the cylinder is to be ob-
served.