COMAC CM 50 hs Mode D'emploi page 30

At the end of the work, before performing any type of maintenance proceed as follows
1. Actuate switch (2) to lift the base
2. Park the machine and actuate the parking brake
3. Turn the key to position "0" to turn the machine off
5. Lift the hood and install the safety strut
WARNING! Always wear gloves when doing this to protect yourself from WARNING! WARNING! WARNING!
contact with hazardous solutions.
6. Replace disposable filter (7)
7. Remove the safety strut and lower the hood
AFTER WORK IS TERMINATED AFTER WORK IS TERMINATED
AFTER WORK IS TERMINATED AFTER WORK IS TERMINATED
30
2
1
3
5