Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hand Winch - LB
English
Before taking into operation, please carefully
read this operating instruction!
Observe the safety instructions!
File documentation!
Destined use
The Hand Winch LB is a manually winch operated
for lifting and lowering of loads.
Not suitable for use in explosive danger area.
Not suitable for use in corrosive atmosphere(See
also page10).
Power operation is not allowed.
The winch is not designed for continuous
operation.
Alterations to the winch or fitting of accessories are
only allowed with our written approval.
Pay attention to the technical data and functional
description!
Regulations for the Prevention of Ac-
cidents
Observe any rules which are valid for the respective
1)
country.
Presently valid in Germany:
EC directive 98/37/EC
BGV D 8 winches- lifting and pulling devices
BGR 500-2.8 load suspension devices in hoist operation
DIN 15020 page 1 and page 2
FEM 9.661 ISO 4308/1
1)
in the respective version
Safety Instructions
Operation,
installation
should only be executed by personnel who are:
Competent, qualified persons
(definition of experts acc. to IEC 364)
Qualified persons for reasons of their training, experi-
ence and instruction are persons who do their neces-
sary activities without danger and who can avoid this
danger due to their knowledge of directives, regulations
for the prevention of accidents and standards. These
persons are responsible for the security of the
installation.
Do not grease or lubricate the brake mechanism.
Moving of people by the winch or of loads over
people is strictly forbidden.
Never touch moving parts.
Defects must be repaired immediately by competent
trained personnel.
The load
must not be left suspended without supervision,
must not be allowed to swing
must not fall into the wire rope
design changes under reserve
!
and
maintenance
work
04.04.004
The rope
should only be used for lifting, lowering or pulling
of various loads and must not be used for any
other purpose.
at least 3 full turns of rope should
remain on the drum when loaded.
max. fleet angle 3° (see picture)
for standard wire rope ≤3°,
for special rope ≤1,5°
when filled to its capacity the drum
flanges mist project not less than 1.5
times the diameter of the rope.
examine and service regularly acc.
to DIN 15020 page 2
only handle with safety gloves
do not touch the rope inlet
The Winch
Do not exceed the capacity of each rope layer.
Before taking into operation, a competent person
must check:
the lifting device
the load bearing parts of the structure
the carrying medium
mounting
Daily examinations:
brake functions
condition of the rope and loading device
load bearing parts of the structure.
the load carrying medium
Load attachment device:
check it has sufficient carrying capacity
load hooks must have safety catches.
load hooks must be secured to the rope with a
solid eye and high pressure rope clamp and
tested according to the regulations (included into
scope of delivery of Pfaff-silberblau ropes)
fix the load correctly
do not use the winch rope as a hitching device.
The winch should be given a thorough examination
by a competent person at least once a year.
Always ensure the maintenance intervals are ad-
hered to.
Only use original accessories and spare parts;
otherwise safe function is not guaranteed.
3°
3°
1,5°
1,5°
3. 2. 1.
page 9
Publicité
Table des Matières
