Snooper SYRIUS PRO S7000 Guide De L'utilisateur page 9

Tip: The default route options are set to Quickest Route.
To change the route options refer to section 6 in this user
manual.
4. Press
fastest route from your current position to your destination.
This should only take a few moments and a progress bar is
shown on the screen.
5. A journey summary screen will then be
displayed
Please note: The summary screen is only
displayed for approximately 10 seconds
before the unit automatically begins to
provide you with turn-by-turn instructions.
6. Press
The navigation view will now be displayed, but with the
route now highlighted for you. As you approach a specific
turn in the calculated route, S7000 will advise you what
to do. For example, "After 200 yards, turn left", followed
by "Now turn left". As you proceed along your journey,
following the voice instructions, you will notice that the
navigation view is updated constantly, always showing
approaching roads and junctions and presenting the best
route to you.
Tip: If you miss a turn or drive down a wrong road, a new
fastest route will be calculated automatically, based on
your new position and direction of travel, a tone will
be heard to confirm re-routing. S7000 will always give
you clear instructions that will take you to your chosen
destination.
Return to contents
and S7000 will calculate the
Final Destination Estimated arrival Time
8 • UK
Your current
location
Distance to
destination
Estimated
journey time
Refer to section 6.0
on page 63 for details