5.7 Show POI
S7000 comes complete with a comprehensive list of POI's (Point's of
Interest). You can search for addresses using POI's and save POI's in your list
of favourites. You can also choose which of the POI's you would like to have
indicated on your map. As standard ALL POI's are shown, however this list
can be edited within the POI Menu.
Press the centre of the screen to enter the 'Navigate to' menu.
●
●
Press the 'Configure' button.
●
●
Press the 'Show POI' icon.
●
●
The screen will now show a list of POI's stored on your unit with a 'tick'
box to the left of each type of POI. Simply press the tick box to select or
deselect the POI. A red tick in the box indicates that the POI will appear
on your map, an un-ticked box will remove the POI from the map view. To
scroll through the list of POI's you can press either the up or down arrows
located on the right hand side of the display.
To deselect all POI's from the map un-tick the 'ALL' tick box at the top of
the list of POI's
To save the changes press the 'OK' button at the bottom of the display.
If you wish to exit the 'Show POI' list without saving any changes press the return arrow
corner of the display.
5.8 Auto Scale
Auto Scale is switched 'On' by default during manufacture. Auto
Scale automatically magnifies the map as you approach a junction or
roundabout, where you may need to make a turning, so that you can see
it in more detail.
Auto Scale can be turned on and off as you wish. To change this setting:
Press the centre of the screen to enter the 'Navigate to' menu.
●
●
Press the 'Configure' button.
●
●
Press the 'Auto scale' icon.
●
●
The screen will now show two options 'Yes' and 'No'. To make your
selection, touch the relevant tick box with your finger.
To save the changes press the 'OK' button at the bottom of the display.
If you wish to exit the 'Auto scale' menu without saving any changes press the return arrow
corner of the display.
Return to contents
55 • UK
located in the bottom right hand
located in the bottom right hand