Snooper SYRIUS PRO S7000 Guide De L'utilisateur page 34

Select the POI with your finger; an information screen will be displayed. Press 'OK' if the POI is correct, press 'Map' to view the POI
location on the map, press 'Route options' to change start position or press
Press 'Calculate' and a journey summary screen will be displayed. Press 'GO' to start
navigation.
3.11.2 Find around current position
Press the centre of the screen to enter the 'Navigate to' menu.
● ●
Press the black arrow once.
● ●
Press the 'User POI' icon.
● ●
Press the POI you wish to look for
● ●
Select 'Find around current position'
● ●
Select the maximum radius you wish the unit to search for (the default setting is 30
● ●
miles) and then press 'OK'
A list of POI's within the specified radius and category will be displayed. Use the arrows to
the right hand side of the screen to scroll up and down through the options. When you
find the POI that you are looking for, select it with your finger
To start the journey press 'OK' followed by 'Calculate'
● ●
To view the location of the POI, press 'Map'.
● ●
To change the route parameters press 'Route Option' (see Section 6: Route Options
● ●
on page 65 for specific instructions).
To return to the previous page press the return arrow
● ●
right hand corner of the display.
Once the calculation is complete you can either press 'Go' to start navigation, 'Simulation' to see the actual route that will be
taken, 'Route Option' to change the parameters of the route or 'Guide' which will list the turn by turn instructions of the journey.
The 'Summary Screen' will tell you the distance to your destination, estimated time of arrival and the estimated time it will take to
complete your journey.
Please note: The summary screen is only displayed for approximately 10 seconds before the unit automatically begins to
provide you with turn-by-turn instructions.
Return to contents
to return to the previous screen.
located on the bottom
33 • UK