Gps Status; System Security Code; Configuration Security Code - Snooper SYRIUS PRO S7000 Guide De L'utilisateur

5.15 GPS status
You can check the health of the GPS connection of your unit at any
time as well as being able to see the exact coordinates of your current
position by using this feature.
Press the centre of the screen to enter the 'Navigate to' menu.
● ●
Press the 'Configure' button.
● ●
Press the black arrow
● ●
Press the 'GPS status' icon.
● ●
Your current GPS status will then be displayed. If you wish to revert the
GPS engine to the factory default, press the 'Reset' button.
If you wish to exit the 'GPS status' menu press the return arrow
5.16 System Security Code
S7000 incorporates pin code security protection so that only users with access to the pin code can use and operate the device. To
activate the security code press the centre of the display to access the menu, press 'Configure' , press the black arrow twice and then
press the 'System Security Code' icon. Select 'Yes' to switch the function on. Press the 'Enter Code' button and enter the 4 digit
code that you would like to use to protect your S7000 and press 'OK'. Once this setting has been activated you will need to enter this
code each time you power on your S7000 or you will not be able to operate the device.
NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your S7000 so that the
unit can be reset.
5.17 Configuration Security Code
It is also possible to protect the configuration settings using a security pin code. To activate the security configuration code press the
centre of the display to access the menu, press 'Configure', press the black arrow twice and then press the 'Configuration Security
Code' icon. Select 'Yes' to switch the function on. Press the 'Enter Code' button and enter the 4 digit code that you would like to use
to protect the configuration settings and press 'OK'. Once this setting has been activated you will need to enter this code each time
you want to amend the configuration settings on your S7000.
NB. It is important that you do not lose or forget this code. If you forget this code you will need to return your S7000 so that the
unit can be reset.
Return to contents
once.
(on Truckmate or Ventura this icon will NOT be visible if the unit is in CAR mode).
(on Truckmate or Ventura this icon will NOT be visible if the unit is in CAR mode).
located in the bottom right hand corner of the display.
61 • UK