Downloading The Aura™ Camera Database - Snooper SYRIUS PRO S7000 Guide De L'utilisateur

Downloading the AURA™ Camera Database
Performing a download is simple.
1. Connect the AC Power adapter provided to a mains plug socket and
attach the other end to the S7000 power socket.
2. Power up S7000 by pressing and holding the power button for 2
seconds and ensure that the computer is connected to the Internet.
3* . Right click on the symbol located in the bottom right hand corner of
your desktop in the system tray and left click 'Download Settings' .
4* . Select the files you wish to download (UK Cameras is selected by
default). Once you have selected the files you wish to download left
click the 'OK' button.
5. Connect the USB lead to your computer and plug the other end of the
lead into S7000 in the socket marked with the USB symbol.
6. The updater software will then start to run automatically and
download the database files that you have selected onto your unit.
The download process is as follows:
The software will display the serial number of the S7000 and a green
● ●
progress bar will start to progress across the screen.
The software will then connect to our database server and then
● ●
download** the speed camera database.
The S7000 will then save the data received.
● ●
The software will indicate that the download is complete and will
● ●
instruct you to disconnect the S7000 from your PC.
Note: The software will shut down automatically after 5 seconds if
you do not disconnect your unit as instructed.
*You only need to do these steps if you wish to change the data that
is downloaded onto the S7000. If you want the download settings to be
the same as the previous download ignore these two steps.
**If you have a Firewall on your computer, the Firewall software may inform you that the updater software is trying to access the
internet. Please make sure that you grant/allow/permit access to the updater program through the Firewall.
Please read the messages supplied by your Firewall software carefully before choosing your option. If you do not allow the program
to access the internet through the Firewall, the download process will fail.
Return to contents
Please Note: You must register S7000 before you can perform a download.
Plug the
charger cable into
the socket on the
side of the S7000
10 • UK
Plug the charger into a
240V AC mains socket
Connect the USB lead to
S7000