37 1.2 Altering Of The Operation Data - AO Smith AH-290 Manuel D'installation, Mode D'emploi, Manual D'entretien

P5: Operating thermostat for electrical cartridge
The sanitary water temperature may be adjusted between 0 - 65°C.
The electric cartridge solely heats the top half of the container, while
+
the heat pump still heats the lower half of the container.
Factory setting: 50°C
Display indication
It is possible to view various temperatures in the display, by pressing
the arrows until the required temperature has been shown.
After app. 5 seconds, the temperature is shown. The temperature
is shown for app. 30 seconds until the display returns to standard.
Following temperatures may be shown:
T5: Ambient temperature
T6: Cooling coil
T7: Sanitary water top
T8: Sanitary water bottom
1.2 Altering of the operation data
Usually, the display shows the water temperature.
Press (arrow up) and (arrow down) simultaneously for app. 10 seconds in
order to enter the operating menu. To show the chosen value press The
display will now show the first point E0 in the operating menu. The
operating menu will close and return to the main menu if a button has not
been pressed for 15 sec.
If you wish to scroll through the operating menu, it may be done by pressing
(arrow up) or (arrow down). The value of a point is shown when pressing
(temp button). The value may be changed with the (arrow up) or (arrow
down) while simultaneously pressing (temp button). The control will return
to standard indication if no buttons have been pressed for app. 15
seconds.
53