Placement /Set-Up - AO Smith AH-290 Manuel D'installation, Mode D'emploi, Manual D'entretien

46
2.5

Placement /set-up

The heat pump may only be installed in a frost-free room.
The installation location should comply with the following criteria:
• Room temperature between +8 and +35°C.
• Drain possibility for condensate water.
• No abnormal dust concentration in the air.
• Solid base (approx. 500 kg/m²)
• To achieve problem-free functioning and to allow access for service,
it is recommended that 0,5 m free space be maintained around the unit.
Set-up sequence:
1. Remove the packaging from the pallet.
2. Remove the transport fittings from the pallet.
3. Take the heat pump off the pallet and place it at the desired
location.
Adjust the heat pump vertically by adjusting the feet.
1. Screws to be removed (hexagonal head).
2. Screws to be removed.
3. Removal of screws.