AO Smith AH-290 Manuel D'installation, Mode D'emploi, Manual D'entretien page 47

4. Removal of product :
a: Glide product carefully to one side a bit.
b: Bow over to the same side together with 2 pcs. of wood beneath.
5. Carry on with removal :
c: Remove the lower part of the palette while keeping the product in an
angle position, still with 2 pcs. wood beneath
6. Product on floor with 2 pcs. of wood.
7. Removal of 1st piece of wood (can be released if product bowed
a bit to one side).
47