Default Values; Maintaining And Cleaning; Maintaining; Replacement Of The Germanium Glass - Videotec NTC Manuel D'instructions

Caisson avec module thermique pour les installations dans des milieux agressifs

Masquer les pouces Voir aussi pour NTC:

Table des Matières

Les langues disponibles

7.4.3 Default values

If it is necessary to restore the camera's default

configuration (factory settings), click on the Setup

key and then press Factory Defaults and Save

Settings...

Fig. 19

For the full description of all the advanced options of

the Camera Controller GUI software, refer to the FLIR

Camera Controller GUI User's Guide.

8.1.1 Replacement of the germanium

glass

Unscrew the fixing screws of the front flange using

the supplied Allen wrench. Remove the flange and

position the spare part, making sure the gasket

remains in place. Tighten the 4 fixing screws.

Fig. 20

Use a fuse with the following features:

T 500mA L 250V

Table des Matières

Table des Matières