Video Signal Format - Videotec NTC Manuel D'instructions

Select the Serial option (RS-232) and, in the next
window, choose the right COM Port.
Fig. 16
Confirm with the Finish key.
When the software establishes a connection with the
camera, the word 'Connected' appears at the bottom
of the window and the bar is green instead of grey.
Fig. 17
12

7.4.2 Video signal format

By default, the FLIR module generates a video signal
in NTSC format.
To generate a video signal in PAL format, click on the
Video key and select the Video Standard/PAL radio
button.
Fig. 18