Publicité
Les langues disponibles
Les langues disponibles
5. TRANSPORT AND WAREHOUSE STORAGE
1
All cassette fan coils are packed in a carton box. On the carton box there are proper holes
for handling the unit and symbols showing how to stock the goods correctly. Even though
2
the units have been properly protected to withstand adverse conditions, we recommend
that they are kept under the following ambient conditions (if stored in the warehouse for
long periods of time): temperature min. -5 °C, max. 50 °C; relative humidity less than 80%.
3
A label on each carton box provides complete information on its contents.
When receiving the goods, please open the shipping carton, to make sure that all
4
components are present and in good condition. Any damage must be immediately
communicated to the shipping agent, and our service department must be notified
immediately if any material is missing.
5
6. INSTALLATION
6
6.1 PRESCRIPTIONS AND OBLIGATIONS
Each operation for installation and/or maintenance must be executed by qualified
7
personnel only, by respecting the safety norms and the installation rules of the
Country where the cassette fan coil is installed. EURAPO s.r.l. refuses every
responsibility for any damages caused by incorrect installation or improper use of
8
the cassette fan coil and its accessories. In particular, when making connections,
do not use hanging, non-standard connections or flexible tubes with unsuitable
connectors. Always use expansion bolts.
9
Stated first that the cassette fan coil unit must be installed in a false ceiling, the
positioning of the unit and all the connections related to it must be decided by
10
the designer of the system. He has to assure the correct functioning of the unit
and the respect of the Norms and Rules of the Country where the unit is installed.
+
It is a mandatory:
•
to install the horizontal fan coil unit at least at 1,80 mt from the floor;
•
to use water or a mixture of water and propylene or ethylene glycol to feed the heat exchanger.
Maximum glycol content 50%.
Installation sites to avoid:
•
moist rooms or places where the unit may get in contact with water sprays (laundries, bath-
rooms, etc.);
•
areas exposed to direct sunshine or too close to heating sources (lamps etc.);
•
rooms where the following substances might be present: flammable gas, alkaline material or
oil vapours;
•
positions where the air intake or air outlet might be obstructed (by shelving, furniture etc.);
32
Publicité
