Table Des Matières - AERMEC ECA Série Manuel D'installation

CONTENTS
Remarks • Available versions and sizes • Operation limits • Installation
Unit installation • Connections
External fresh air • Delivery of treated air to adjacent room
Refrigerant lines
Dip Switch configuration
Dimensions
Wiring diagrams
REMARKS
Store the manuals in a dry location to avoid deterioration, as they must be kept for at least 10 years for any future reference.
All the information in this manual must be carefully read and understood. Pay particular attention to the operating
standards with "DANGER" or "WARNING" signals as their disrespect can cause damage to the machine and/or per-
sons or objects.
WARNING: check that the power supply is disconnected before performing operations on the unit.
WARNING: wiring connections installation of the units and relevant accessories should be performed by a technician who
has the necessary technical and professional expertise to install air conditioning plants, modify, extend and maintain
plants and who is able to check the plants for the purposes of safety and correct operation (In this manual authorised per-
sonnel are referred to with the generic term "personnel with the necessary technical skills").
In the specific case of electrical connections, the following must be checked:
- Measurement of the isolation resistance on the electrical system.
- Testing of the continuity of protection conductors.
If any malfunctions are not included in this manual, contact the local Aftersales Service immediately.
AERMEC S.p.A. declines all responsibility for any damage whatsoever caused by improper use of the machine, and a partial
or superficial acquaintance with the information contained in this manual.
This manual has 64 pages.
GB
17
18
20
21
22
23
26
17