Alfa 2622 Livret D'instructions page 124

(A) (B)
(200V)
(100V)
Sewing Light
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing machine
by removing the setscrew.
* Unplug the power supply before changing the bulb.
* Do not dismantle the machine other than explained in this
manual.
(A) To remove ........ Turn to the left.
To replace ........ Turn to the right.
(B) To remove ........ Push and twist to the left.
To replace ........ Push and twist to the right.
Warning :
The bulb could be HOT. Protect your fingers when
handle it.
30