Publicité
Les langues disponibles
Les langues disponibles
Installation – Assembly
Electric installation should be equipped with residual current
!
protective devices and other solutions which will ensure
disconnecting the heater from the source of power (intervals
between all their poles should not be less than 3 mm).
Electric heater should be connected to the electrical installation
only by the integral factory-attached power supply cable.
8
1.
Fix the mixer tap set on water supply pipe.
2.
Mount shower set elements in previously
selected place. Connect shower hose with
the tap.
Shower handle should be attached in
such a place as to prevent water outflow
directed on the electric heater and supply
valve.
3.
Connect the heater to the tap body.
4.
Connect the tap body to the shower set
elements.
5.
Open the tap.
6.
Check for leaks.
7.
Vent the water installation.
8.
Connect the heater to the power source
(through the installation cable box).
9.
Turn on power supply (fuse).
Publicité
