Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 8

TOOLS INCLUDED:
13/15mm Flat Wrench
Phillips Screwdriver/Allen Wrench
PARTS INCLUDED:
1 Bike Frame
1 Console
1 Console Mast
1 Console Mast Grommet
1 Front Stabilizer Tube
1 Rear Stabilizer Tube
1 Seat
1 Padded Seat Back (LS5.0R only)
1 Mesh Seat Back (LS6.0R only)
1 Seat Back Bracket (LS6.0R only)
1 Seat Back Bracket Plate (LS6.0R only)
1 Seat Post Tube (LS5.0U only)
1 Seat Post Bracket (LS5.0U only)
1 Handlebar Bracket Cover (LS5.0U only)
1 Pulse Grip Handlebars
2 Pedals with Straps
1 Water Bottle Holder
1 Audio Adapter Cable
1 Power Cord
1 Hardware Kit
NOTE: User must provide their own USB flash
drive for the LIVETRACK Interactive Technology.
8
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the exercise bike carton on a
level flat surface. It is recommended that you place a protective covering on your
floor. Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NEED HELP?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.