Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 21

5.0 ASSEMBLY STEP 4
LS U
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
HANDLEBAR
HANDLBAR WIRES
CONSOLE MAST
SCREWS (H)
HANDLBAR COVER
CONSOLE MAST
WATER BOTTLE HOLDER
A
B
C
D
E
SCREWS (H)
HARDWARE FOR STEP 4 :
BOLT (A) SPRING WASHER (B)
20 mm 15.4 mm
Qty: 4 Qty: 4
SCREW (H)
15 mm
Qty: 4
Open HARDWARE FOR STEP 4.
Feed the HANDLBAR WIRES through the hole in the
CONSOLE MAST and out the top of the CONSOLE
MAST.
Attach the HANDLEBAR to the CONSOLE MAST
using 4 BOLTS (A), 4 SPRING WASHERS (B) and
4 FLAT WASHERS (C).
Attach the HANDLEBAR COVER to the CONSOLE
MAST using 2 SCREWS (H).
Attach the WATER BOTTLE HOLDER to the
CONSOLE MAST using 2 SCREWS (H).
NOTE: Be careful not to pinch any wires
while attaching the handlebars.
LS 5.0 U
FLAT WASHER (C)
16 mm
Qty: 4
21