Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 22

5.0 ASSEMBLY STEP 5
LS U
LS 5.0 U
CONSOLE
CONSOLE CABLES
CONSOLE MAST
22
PRE-INSTALLED SCREWS
POWER ADAPTER
PEDALS
RIGHT CRANK ARM
* NOTE: There is no hardware for this step.
A Open HARDWARE FOR STEP 5.
B Attach the RIGHT PEDAL to the RIGHT CRANK
ARM, tightening it CLOCKWISE with the provided
13mm/15mm flat wrench.
C Attach the LEFT PEDAL onto the LEFT CRANK
ARM, tightening it COUNTER-CLOCKWISE with the
provided 13mm/15mm flat wrench. (NOTE: The left
crank arm is reversed threaded so it is very important
that it is tightened counter-clockwise. Tightening it
the opposite way can damage the pedal or the crank
arm or both.)
D Connect the CONSOLE CABLES and carefully tuck
the CONSOLE CABLES into the CONSOLE MAST.
E Attach the CONSOLE to the CONSOLE MAST using
the 4 PRE-ATTACHED SCREWS (The screws will
have to be removed from the console first).
F Plug in POWER ADAPTER as shown.
LS5.0U ASSEMBLY COMPLETE!