Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 12

5.0 ,
LS R LS
LS6.0R SHOWN
5.0
LS R
LS 6.0 R
CONSOLE
CONSOLE CABLES
PRE-INSTALLED SCREWS
CONSOLE MAST
PEDALS
LEFT CRANK ARM
NOTE: Be careful not to pinch any wires while attaching the console.
12
6.0 ASSEMBLY STEP 3
R
PEDAL STRAP
PEDAL
* NOTE: There is no hardware for this step.
A Attach PEDAL STRAPS to PEDALS.
B Attach the RIGHT PEDAL to the RIGHT CRANK
ARM, tightening it CLOCKWISE with the provided
13mm/15mm flat wrench.
C Attach the LEFT PEDAL onto the LEFT CRANK
ARM, tightening it COUNTER-CLOCKWISE with the
provided 13mm/15mm flat wrench. (NOTE: The left
crank arm is reversed threaded so it is very important
that it is tightened counter-clockwise. Tightening it
the opposite way can damage the pedal or the crank
arm or both.)
D Connect the CONSOLE CABLES and carefully tuck
the CONSOLE CABLES into the CONSOLE MAST.
E Attach the CONSOLE to the CONSOLE MAST using
the 4 PRE-ATTACHED SCREWS (The screws will
have to be removed from the console first).