Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 20

5.0 ASSEMBLY STEP 3
LS U
LS 5.0 U
CONSOLE MAST
CONSOLE MAST GROMMET
BOLTS (F)
SPRING WASHERS (B)
FLAT WASHERS (C)
BIKE FRAME
20
CONSOLE
CABLES
HARDWARE FOR STEP 3 :
BOLT (F)
50 mm
Qty: 4
FLAT WASHER (C)
16 mm
Qty: 4
A Open HARDWARE FOR STEP 3.
B Slide CONSOLE MAST GROMMET from the bottom
up the CONSOLE MAST.
C Attach CONSOLE CABLES and carefully tuck all
cables into BIKE FRAME. Slide CONSOLE MAST
into BIKE FRAME.
D Attach the CONSOLE MAST to the BIKE FRAME
using 4 BOLT (F), 4 SPRING WASHERS (B) and 4
FLAT WASHERS (C) from the rear.
E Slide CONSOLE MAST GROMMET down over
BIKE FRAME.
NOTE: Be careful not to pinch any wires
while attaching the console mast.
SPRING WASHER (B)
15.4 mm
Qty: 4