Johnson LIVE STRONG LS5.0R Manuel Du Propriétaire page 17

6.0 ASSEMBLY STEP 6
LS R
LS6.0R SHOWN
SEAT BACK BRACKET
SEAT BACK BRACKET PLATE
MESH SEAT BACK
POWER
ADAPTER
FLAT WASHERS (C)
SEAT CABLE
HEART RATE WIRES
HARDWARE FOR STEP 6 :
NUT (F)
Qty: 3
* NOTE: This step is for LS6.0R models only.
A Open HARDWARE FOR STEP 6.
BOLTS (I)
B Place SEAT BACK BRACKET PLATE on the inside
of the mesh seat back mount. Align mesh SEAT
NUTS (F)
BACK to seat back bracket.
C Attach mesh seat back to seat back bracket using 3
BOLTS (I) and 3 FLAT WASHERS (C) from the rear
and 3 FLAT WASHERS (C) and 3 NUTS (F) on the
other side of the seat back bracket plate.
D Connect HEART RATE WIRES to SEAT CABLE.
Attach SEAT CABLE as shown. Plug in POWER
ADAPTER as shown.
LS6.0R ASSEMBLY COMPLETE!
BOLT (I) FLAT WASHER (C)
35 mm 16 mm
Qty: 3 Qty: 6
LS 6.0 R
17