Timex W223 Manuel page 11

ENGLISH
NOTE:
When the timer counts down to zero it will beep for
20 seconds.
To stop the timer beep, PRESS any pusher.
"T" will appear to designate that the countdown
timer is running.
Countdown time up to 24 hours.
PRESS and HOLD pusher "C" for 2 seconds in setting
mode, to activate fast advance.
TO USE CHRONOGRAPH FOR STANDARD
MEASUREMENT:
1) PRESS pusher "A" to bring up CHRONOGRAPH dis-
play; "CH LAP" or "CH SPL" will appear.
2) PRESS pusher "C" to start timing.
3) PRESS pusher "D" to stop timing.
4) PRESS pusher "D" to reset.
14
OR
ENGLISH
TO USE CHRONOGRAPH FOR LAP OR SPLIT
TIME MEASUREMENT:
1) PRESS pusher "A" to bring up CHRONOGRAPH
display; "CH LAP" or "CH SPL" will appear.
2) PRESS pusher "D" to select LAP or SPLIT.
3) PRESS pusher "C" to start timing.
4) PRESS pusher "C" to record the first Lap or Split
time; digits will be frozen for 15 seconds; "L" or
"S" will flash to indicate that the next Lap or Split
time is being recorded in the background.
5) PRESS pusher "A" to view the running display
while the display is frozen.
6) PRESS pusher "C" to take another Lap or Split.
7) PRESS pusher "D" to stop.
8) PRESS pusher "D" again to reset.
NOTE: CHRONOGRAPH must be reset to zero to
switch between LAP and SPLIT.
Records time up to 24 hours and shows 1/100 of
seconds for the first hour.
15