Filling With Coolant; Initial Start-Up - Alphacool EISBAER SOLO Manuel D'installation

Eisbaer solo Alphacool International GmbH

FILLING WITH COOLANT

A fillport on the cooler is provided for filling. Fill the reservoir of the Eisbaer until the
window is completely filled with water.
We recommend using a funnel or a filling bottle:
We only recommend clear coolants from our own production (CKC or Eiswasser Crystal -
no UV!) or pure distilled or osmosis filtered water.

INITIAL START-UP

If your Eisbaer is unusually loud during initial operation, tipping the entire PC case back and
forth a little can help. The higher volume level of the pump occurs due to air bubbles in the
closed system.
Double-check that the radiator is mounted above the water block. This setup helps de-
aerate the system. After around 12 hours of operation any air in the system should be
eliminated and the pump should run quietly as usual.
36