Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Eisbaer solo
•
Remove any remaining thermal paste from the CPU.
•
Apply a pea-sized blob of thermal paste to the center of the CPU.
•
Spread the paste using a spatular, or similar to an even, thin layer (< 0.5 mm layer
thickness).
•
Remove the protective film from the cooling plate.
•
Remove the protective film from the adhesive strips of
the included backplate. Please note
the correct alignment of the
backplate:
Alphacool International GmbH
24
Publicité
Table des Matières
