KTM 63512929544 Mode D'emploi page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6 CHANGING THE LOCKING CYLINDER
16
Move the key into top position
Push engaging plate
Remove the locking cylinder.
Info
It is essential that the key remains in the locking cylin-
der.
500432-01
Installing the locking cylinder
Mount O-ring
Position and insert the locking cylinder as shown in the
figure (the catch must point downwards).
Engaging plate
500414-01
Mount plug
Info
The catch of the plug must be seated in front of the
first gear teeth (see arrow).
500433-01
Move the key 90° to the right
Mount the cover with the springs.
Info
Make sure that the springs are correctly seated on
the corresponding catches.
Mount and tighten screws
Position rocker arm
500434-01
Mount and tighten pin
Move the key into top position
Mount the securing unit.
Info
The spring must be seated on the corresponding
recess (see arrow).
500435-01
J
.
bn
into the locking cylinder.
bp
(included).
bn
engages.
dk
.
K
.
ct
.
cs
with the spring facing upward.
cr
.
J
.

Publicité

Table des Matières
loading

Table des Matières