KTM 63512929544 Mode D'emploi page 35

6.1 Changing the locking cylinder
CHANGING THE LOCKING CYLINDER 6
Removing the locking cylinder
–
Move the key 90° to the right
–
Detach the catch straps.
–
Remove rubber seal
–
Remove screws
Info
If rubber plugs are mounted on the four outer
screws, remove these first.
500427-01
–
Remove the frame with the cover.
–
Remove screws
–
Remove screws
–
Remove screws
500428-01
–
Remove the securing unit.
500429-01
–
cr
Remove pin
–
Take off rocker arm
–
Remove screws
–
Remove the cover with the springs.
Info
Ensure that the springs remain in place.
500430-01
–
Remove plug
500431-01
K
.
cm
.
cn
.
co
.
cp
.
cq
.
.
cs
.
ct
.
dk
.
15