Basic Operations - Alpine PKG-RSE3HDMI Guide D'installation

Basic Operations

Turning Power ON/OFF
the power state of the monitor is memorized when ignition/acc
is turned off. When ignition/acc is turned back on, the monitor
returns to the memorized power state (either on or oFF),
including dVd playback position.
Main Control Keys
• Press POWER ( ) to turn ON the monitor.
• To turn off power, press and hold POWER (
again.
• While the power is ON, press POWER (
function.
Remote Control
• Press POWER to turn ON and OFF.
Front Passenger Controls
• Press PLAY/PAUSE button to turn ON.
• To turn off the power, press and hold PLAY/
PAUSE.
Muting the Audio
Main Control Keys
While the power is ON, press POWER (
the Mute function.
Press POWER ( ) again to turn OFF the Mute
function.
Remote Control
Press MUTE to turn it ON and OFF.
4
-EN
Switching the Source
Main Control Keys and Remote Control
1
Press SELECT (
Menu.
2
Press SELECT (
different sources.
)
) to activate the Mute
Remote Control
Press source buttons (DVD, USB, HDMI1, HDMI2 and
AUX) to select the source instantly.
• OSD (On Screen Display) will turn OFF automatically after 5
seconds without use.
• When the source is changed, the power is turned OFF or the ACC
is turned OFF , the device remembers the scene where the internal
DVD stopped and playback will resume from that point.
Setting the Backlight Brightness
1
Press Dimmer (
) to activate
the remote control to cycle through High/Mid/Low.
• OSD will disappear in 3 seconds.
It is also changed from the backlight tab in the
Picture Setting Menu with < or > buttons. (refer to
Monitor Setup instructions page 6)
• OSD will disappear in 8 seconds.
• Press and hold the DIMMER (
access the monitor setup menus.
) to display the Source Select
) again to cycle through the
DVD USB HDMI1 HDMI2
) on the Main Control Keys or
) button for at least 2 seconds to
HIGH
MID LOW
Dimmer
ENT
DVD
Main Control Keys
AUX