Télécharger Imprimer la page

NSK Ti-Max Z10L Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

• If the handpiece has not been used for a long period, rotate
the handpiece and check for noise, vibration and overheating
before use.
• To avoid clinical downtime it is recommended that a spare be
kept on hand in case of a breakdown during treatment.
• The operation of the handpiece is permitted only on dental
units which correspond to the standards IEC 60601-1 (EN
60601-1) and IEC 60601-1-2 (EN 60601-1-2).
• U.S. Federal law restricts this device to sale by or on the order
of a licensed physician.
Z85L / X85L / X85
• Use a short shank FG bur for the product because the
handpiece has the miniature head. Using a long bur with this
handpiece may lead to premature abrasion of the bearings. In
addition, sudden release, bend or breakage of the bur may
occur.
CAUTION
Z95L / X95L / X95 / M95L / M95 / nano95LS
• Do not use a surgical bur with its maximum length of 25mm
or longer. Using such bur with this handpiece may lead to
premature abrasion of the bearings. In addition, sudden
release, bend or breakage of the bur may occur.
• Repairs of this product are only to be performed by authorized
service technicians according to NSK requirements. Contact
your Authorized NSK Dealer if repairs are necessary.
CAUTION
NOTICE
5

Publicité

loading