NSK Ti-Max Z10L Mode D'emploi page 10

Z85L / Z95L / X20L / X20 / X85L / X85 / X95L / X95 /
M95L / M95 / nano95LS (Fig. 3)
1) Insert the bur into the
chuck.
2) Depress the Push Button
to open the chuck (1).
3) Insert the bur fully into the
chuck until it stops (2)
then release the Push
Button.
4) Confirm that the bur is not removed by gently pulling and
pushing the bur without depressing the Push Button.
• Grip the handpiece while placing your thumb tip on the
Push button which makes it easier to depress the button.
8
Push Button
NOTICE
5-2 Removing the Bur
Depress the Push Button to
open the chuck (1) and
remove the bur (2).
Fig. 3
Push Button
Fig. 4