Publicité
Les langues disponibles
Les langues disponibles
Automatic Method (Cleaning and Drying the Exterior and
Interior)
NSK handpieces with this symbol are compatible
with medical thermo-disinfectors.
Due to the variation in cleaning/disinfection cycles and
cleaning agents available from the various manufacturers,
NSK has validated the Getinge 46 Series Washer Disinfector
Cycle P7-Anesthesia for automatic processing/reprocessing of
the product.
Only validated procedures must be used for cleaning and
sterilization. When using reprocessing procedures that are
different from those described in this manual, those
procedures must be validated by the respective practice or
hospital using a thermo-disinfector that conforms to ISO
15883-1.
18
NOTICE
• All water is "building supply" (at least drinking water
quality) unless otherwise indicated.
• The Wrench can be washed via thermo-disinfector.
1) Prepare and pre-cleaning the device as described above in
step "8-1 Cleaning at point-of use".
2) Wipe off a dirt on a part held by a handpiece holder using
the cloth moistened with 60-90% ethanol or disinfectant.
When using disinfectant, follow the instructions given by
the manufacturer of the disinfectant.
Use a state-sanctioned disinfectant with proven
bactericidal, fungicidal, and virucidal properties.
The following disinfectants can be used in the United States
and Canada.
CaviCide
, CaviWipes
(manufactured by Metrex)
®
®
Publicité
