Publicité
Les langues disponibles
Les langues disponibles
8-3
Cleaning and Lubrication
Perform cleaning and lubrication using the manual method, or
lubrication using the automatic method.
Manual Method (Lubricating the Chuck) (Only in the case
of handpiece for FG bur)
1) Attach the tip nozzle to the
nozzle of the PANA SPRAY
Plus.
2) Shake the can three or four
times, then gently press in
the push button to directly
spray into the bur insertion
hole (Fig. 16).
20
Automatic Method (Lubricating the Chuck) (Only in the
case of handpiece for FG bur)
Use an NSK automatic lubrication system to perform
lubrication.
For information on using an automatic lubrication system, see
the instruction manual for the automatic lubrication system.
Bur Insertion Hole
The Care3 Plus cannot be used to lubricate the chuck.
Lubricate it manually.
• If the chuck is not regularly lubricated the chuck grip may
Tip Nozzle
be weakened and the bur may be accidentally released
Fig. 16
during use.
CAUTION
Publicité
