Publicité
Les langues disponibles
Les langues disponibles
Manual Method (Cleaning and Lubricating the Interior)
1) Attach an E-Type Spray
Nozzle to the nozzle of the
PANA SPRAY Plus.
2) Shake the can 3 or 4 times,
and insert the E-Type spray
nozzle into the rear of the
handpiece while holding
the head of the handpiece with a cloth etc.
3) Hold the handpiece, and spray for 2 or 3 seconds until oil
comes out of the handpiece head (Fig. 17).
Repeat lubrication until foreign material stops coming out
of the tip.
E-Type Spray Nozzle
• Do not use sprays other than NSK PANA SPRAY Plus. Using
• Hold the spray can upright.
• Firmly hold the handpiece to prevent it slipping when spray
Fig. 17
• Spray lubricant until it expels from the handpiece head.
• If you wish to purge excessive oil from inside the
CAUTION
sprays other than PANA SPRAY Plus may cause the
handpiece to overheat.
pressure is applied.
handpiece, rotate the handpiece for approx 15 seconds
without a bur. During the rotation, do not depress the push
button, especially when using absorbent cloth to prevent oil
from scattering. Depressing the push button during rotation
may damage the chuck mechanism (Fig.18, Fig.19).
21
Publicité
