Proxxon MICROMOT 50/E Traduction De La Notice D'utilisation Originale page 14

b) allow brushes to run at operating speed
for at least one minute before using
them. During this time no one is to stand
in front or in line with the brush. Loose
bristles or wires will be discharged during
the run-in time.
c) Direct the discharge of the spinning wire
brush away from you. Small particles and
tiny wire fragments may be discharged at
high velocity during the use of these
brushes and may become imbedded in your
skin.
risk of injury!
Never work without dust protec-
tion mask and safety glasses.
Some dusts have a hazardous effect! Materi-
als containing asbestos may not be machined!
For your safety, always wear
hearing protection while working!
Please do not dispo
off the machine!
Protective insulation safety class
system 2
scope of delivery
1 pc. MICROMOT 50/E drill/grinder
1 pc. Power supply unit
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
6 pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2
mm)
1 pc. Round grinding pin Ø 5mm
1 pc. Cylinder grinding pin Ø 6mm
1 pc. Cylinder grinding pin Ø 2.5 mm
1 pc. Cup grinding pin Ø 7mm
1 pc. Tungsten carbide micro drill Ø 0.5 mm
1 pc. Tungsten carbide micro drill Ø 1 mm
1 pc. Diamond-coated grinding pin Ø 1.8
mm
1 pc. Finishing miller, ball shaped Ø 2.3 mm
- 14 -
2 pcs. Sanding disc Ø 22mm (pink colour) of
high-grade corundum, for steel, cast
iron, HSS steels
2 pcs. Sanding disc Ø 22mm (grey), of silicon
carbide, fine, even grain size with con-
sistent hardness. For engraving and
frosting of glass, ceramic and stellites,
also for grinding of metal, white cast iron
and high-alloy steels
1 pc. Polishing disc for acrylic glass and Plex-
iglas
1 pc. Brass brush for machining brass, brass
alloys, copper, precious metals, semi-
precious stones, plastic and wood. For
cleaning electronic components and
printed circuit boards.
20 pcs.Corundum cutting discs for cutting al-
loyed and non-alloyed steel, stainless
steels and non-ferrous metals. Can also
be used to cut wood and plastic.
1 pc. Clamping arbour shaft diameter Ø 3.2
mm
Drilling and milling machine
Overview
legend
1. ON - OFF switch with speed control
2. Hook
3. Power cable
5. Locking pin
6. Spigot nut with steel clamping jaw
7. 20 mm fitting for mounting in drill stand
Description of machine
The PROXXON drilling and milling machine MI-
CROMOT 50/E is the ideal tool for precise
drilling, milling, grinding, polishing, brushing,
rust removal, engraving, chasing and cutting.
For hobby electronics, model making, precision
mechanics, jewellery shops, opticians, arts, tool
and mould making.
For marking tools and cameras.
It can be used on steel, non-ferrous metals,
glass, wood, minerals and ceramics.
The drill spindle is supported in a precision ball
bearing which eliminates any play.
Excellent handling because of the pen-type
grip.