Battery Charge - Denver E Quick Rider X7 Mode D'emploi Et D'entretien

5. Battery charge

If an AC outlet is available within reach of your bike, you can charge your bike directly with the battery still
attached to the bike. The charging port is covered by a plastic cap (Fig 4.3). Please open it then you will
find two ports, the left round one is for charge directly (Fig 4.4). The right one is originally design for USB,
but it wastes the power greatly, so now although it exists, but actually it can not be used, please neglect it.
Removing the battery is useful for charging in a location where the bicycle may not fit or when no
reachable AC power supply exists at the place where the bike is parked
Before removing the battery from the bike, you need to unlock as following steps:
* Turn it clockwise from 12 o'clock to 3 o'clock position. (refer Fig 3.4)
* Remember to take off and care about the key after you withdraw from the battery!!!
(Fig4.3)
Fig4.4)
(
6. LCD looking with Function:
9/54