Denver E Quick Rider X7 Mode D'emploi Et D'entretien page 8

(Fig 3.0)
(Fig 2.9)
3. When the above assembly finish, lift the battery above the frame down tube, aligned position of
battery slides then put the battery case inside the slot, ensure a snug fit, then lock it tightly.
Fixing the battery well, use the key to lock the battery with slide. (Fig 3.1~3.3)
(Fig 3.1)
(Fig 3.2)
(Fig 3.3)
4. Refer to the battery lock and unlock, see the following
pictures for reference.
From the initial position 12 o'clock (where the battery
and tube is locked), insert the key into the key slot,
and turn it clockwise to position 3 o'clock (Then
the battery is unlocked).
On the contrary, you can unlock it. (Fig 3.4)
(Fig.3.4)
8/54