Denver E Quick Rider X7 Mode D'emploi Et D'entretien page 4

• Nuts, bolts, quick-release and parts refastened tight and not worn or damaged.
• Riding position is comfortable.
• Brakes are operating effectively.
• Steering is free with no excessive play.
• Wheels run true and hub bearings are correctly adjusted.
• Wheels are properly secured and locked to frame/fork.
• Tyres are in good condition and inflated to correct pressure.
• Pedals are securely tightened to pedal cranks.
• Gears are correctly adjusted.
• All reflectors are in position.
WARNING WHEELS: Every six months, your pedal electric assistance bicycle should be
professionally checked to ensure that it is in correct and safe working order. It is the responsibility of the
rider to ensure all parts are in working order prior to riding. It is very important to check the rim wear
monthly and monitor the rim wear line, if this groove becomes invisible the rim is past its safe working life.
A severely worn rim is very dangerous and must be replaced.
REGULAR ATTENTION MUST BE PAID TO THE SPOKE TENSION.
Warning: You are warned that you assume the risk for personal injury, damage
or losses if you breach the above conditions and, the warranty will be void
automatically.
Ⅱ. Name of E Quick Rider X7 (E-8200) Components
4/54