An Introduction To Audio Connections - Martin Logan Verse Manuel De L'utilisateur

a I
n ntroductIon to
Digital Optical: Digital optical utilizes one cable to pass digital audio infor-
mation (no video). A digital optical cable offers a high-quality digital
video). An analog RCA cable can only pass a single channel of audio information
stereo "headphone style" jack. If you are connecting this speaker to a device (such
as a dock or CD player) with left/right RCA analog outputs, you will need a special cable with a
3.5mm 'headphone style' jack on one end and left/right RCA jacks on the other end.
Analog Left/Right RCA to Stereo 3.5mm: Analog cables are used to pass audio
information (no video). Older gaming consoles, portable media player docks, VCRs
3.5mm cable.
16
a
udIo
connection and passes multi-channel encoded audio between a source
component and an audio output device.
Left/Right Analog RCA: These cables are used to pass audio information (no
between a source component and audio output device. To achieve two-chan-
nels of audio (left/right), you will find that analog RCA cables come bundled
as a stereo pair (two connectors on each end). The Auxiliary input on this
speaker can accept an analog stereo signal through a cable using a 3.5mm
and similar source components (which are not capable of playing multi-channel
encoded content) will often offer connection only through left/right analog
RCA cables. To connect to these devices use a Left/Right RCA to stereo
c
onnectIons