Bass Level - Martin Logan Verse Manuel De L'utilisateur

subwoofer connections. Activate by pressing the enter
button and the soundbar will respond with 'Saved'.
Subwoofer > Wired Sub: This option con-
figures the soundbar to use an external subwoofer
connected via a cable to the soundbar's Sub Out
RCA connection. Activate by pressing the enter but-
ton and the soundbar will respond with 'Saved'.
With this option, the wireless sub transmitter is turned
off. Reference your subwoofer's manual to learn how
to properly adjust the sub's level and phase controls
to achieve proper blending with the soundbar. The
subwoofer's crossover should be set to "bypass" or
"LFE". For subwoofers that do not have a "bypass"
or "LFE" crossover setting, we recommend adjusting
the crossover to its highest setting.
Subwoofer > Wireless Sub: Enter the
submenu by pressing the enter button. Here you
can sync the soundbar to the subwoofer wireless
receiver (included with your soundbar). Reference
your subwoofer's manual to learn how to prop-
erly adjust the sub's level and phase controls to
achieve proper blending with the soundbar. The
subwoofer's crossover should be set to "bypass" or
"LFE". For subwoofers that do not have a "bypass"
or "LFE" crossover setting, we recommend adjust-
ing the crossover to its highest setting.
a o
n vervIew of the
Installation [select installation location]
|
–› * Shelf Mount [select when set on a flat surface]
†
|
– › Wall Mount [select when mounted to a wall]
|
–› Above TV [select when mounted to a wall, above a TV]
|
– › Below TV [select when mounted to a wall, below a TV]
Subwoofer [select subwoofer configuration]
|
–› * No Sub [select when not using a subwoofer]
†
|
– › Wired Sub [select when attaching a sub via a cable]
|
– › Wireless Sub [configure a wireless subwoofer]
|
–› Sync Subwoofer [sync wireless sub receiver]
|
–› Turn Wirless Sub Off [deactivate wireless sub transmitter]
22
Subwoofer > Wireless Subwoofer >
Sync Subwoofer: This option connects the
soundbar to the Subwoofer Wireless Receiver.
Start syncing by pressing the enter button. The
soundbar will display 'Push and Hold Button'.
Press and hold the subwoofer wireless receiver's sync
button. Connection is successful when the status light
turns solid and the soundbar responds with 'Synced'.
Subwoofer > Wireless Sub > Turn Wireless
Sub Off: This option configures the soundbar to handle
all bass information and, when selected, will not output
information via the wired or wireless subwoofer con-
nections. Activate by pressing the enter button and the
soundbar will respond with 'Off'. Activating this option
performs the same function as 'Subwoofer > No Sub'.
MENU OPTION: BASS LEVEL
Bass Level: Enter the submenu by pressing the
enter button. Here you can configure bass output
by ±10dB in increments of 2dB.
Bass Level > –10dB to +10dB: Using the up/
down directional buttons, choose the desired bass level
(from –10dB to +10dB). Bass level output will be auto-
matically set to match the value currently displayed.
m s
enu tructure
** Some menu options may vary depending on manufacturing date.
**
Bass Level [adjust bass level in 2dB increments]
|
–› +10dB through –10dB [*
Surrounds [configure surround options for 5.1-channel sources]
|
–› Off [turns off simulated surrounds]
|
– › *On [use simulated surrounds at normal level]
|
– › +6dB [increases level of simulated surrounds +6dB]
†
Stereo Mode [configure options for 2-channel stereo sources]
|
–› Wide [creates a wider stereo image]
|
– › Voice+ [simulates a center channel for stereo sources]
†
|
–› *Normal [use original stereo signal]
Bass Mode [select EQ listening mode for bass]
default = 0dB]
†