Updates And Rebooting; Rebooting Your Soundbar; Soundbar Firmware Update - Martin Logan Verse Manuel De L'utilisateur

u
Pdates and

REBOOTING YOUR SOUNDBAR

To completely reboot your soundbar, disconnect
the power cord, wait 30 seconds, and plug it back
in. Press the power button to turn the soundbar on.
This reboot will cycle the power off and on and
force the soundbar to reconnect to your network.
arc™ (a
nthem
Even when the finest speakers are perfectly positioned,
the room itself still has a dramatic impact on any
system's sound, an impact more profound than that
of any individual component. Various solutions have
fallen in and out of favor over the years, but none has
solved the problem of "the room." Until ARC.
Using proprietary processes and the power of your
PC, the ARC system analyzes each speaker's in-
room sound, then computes the required correction
to yield optimal performance from every speaker.
It's a process that takes approximately 15 minutes.
Anthem's approach is a true audiophile solution to
the problems of the room.
IMPORTANT! The listening space must be silent. A noisy
computer fan, a dishwasher or microwave running,
etc. can negatively affect ARC's measurements.
Fig. 14
Microphone
r
eBootIng
r c
oom orrectIon
ARC™
Ear Level

SOUNDBAR FIRMWARE UPDATE

Your soundbar MCU may occasionally require
firmware updates. Please check www.martinlogan.
com for the latest firmware updates.
)
How to Use ARC Technology:
1. Ensure that your soundbar is already connected
to your home network and is powered on.
2. Make sure the soundbar's Power Settings > IP
Control is set to "On".
3. Download the latest Window's version of ARC-2
software from www.anthemav.com or "Anthem
ARC Mobile" from the iTunes App Store and
install it. Follow the on-screen instructions.
4. Window's only: Using the USB cable, connect
the ARC microphone to a Windows PC. The
USB cable and ARC microphone are provided
with your soundbar.
5. Look for the icon and launch the ARC
program. Follow the prompts on your screen to
29