Configuring The System; Main Menu; Language; Zfi Camera Settings Menu - Videotec ULISSE PLUS Manuel D'instructions

9.6 Configuring the system

9.6.1 Main menu

From the main menu it is possible to enter menus for
configuring the device.
MAIN MENU
------------------------
1>LANGUAGE
2 ZFI LENSES
4 MOTION
5 DISPLAY SETUP
6 DIGITAL I/O
7 DEFAULT
8 INFO
Fig. 57
This is a dynamic self-configuration menu based on
the Pan & Tilt model.

9.6.2 Language

This menu is used to select and set the desired
language.
LANGUAGE MENU
------------------------
1 ITALIANO
2>ENGLISH
3 FRANCAIS
4 DEUTSCH
Fig. 58
28

9.6.3 ZFI camera settings menu

01. Zoom: This sets the maximum zoom level that
the motorised lens can achieve.
02. Common Wire: If enabled, it manages the
motorised common wire lenses; if disabled, it
manages those with inversed polarity.
04. Area Titling: Allows access to the area titling
submenu.
>
>
05. Zone Masking: This provides access to the zone
masking management submenu.
>
06. Housing Serial Port: Allows access to the
>
>
submenu for managing the housing serial port.
>
07. Polarity: Allows access to the submenu for
>
managing the polarity of the Zoom, Focus and
Iris motors.
ZFI CAMERA SETTINGS
------------------------
1>ZOOM
2 COMMON WIRE
4 ZONE TITLING
5 ZONE MASKING
6 HOUSING SERIAL PORT
7 POLARITY
OK
Fig. 59

9.6.3.1 Zone titling menu

This function allows setting up to 8 areas (variable
dimension) with titling option.
From the Zone Titling menu it is possible to set the
following parameters:
01. Number: Selects the area to be edited.
02. Enabling: Enables the message linked to the
related zone to be displayed on the screen.
03. Start: Sets the initial position of the area.
04. Stop: sets the final position of the area.
: 30x
: N
>
>
>
>