Aprimatic FORTY 5500 Serie Instructions D'installation Éléctrique, D'utilisation Et D'entretien page 12

OPERATOR FOR SWING GATES
CONTENTS
1. D
ESCRIPTION OF THE OPERATOR
1.1 ENVISAGED USE AND FIELD OF APPLICATION..... 13
1.2 TECHNICAL FEATURES ............................................ 13
1.3 COMPONENTS .......................................................... 14
1.4 OVERALL DIMENSIONS ............................................ 14
2. P
RELIMINARY INSTALLATION OPERATIONS
2.1 PREPARING ELECTRICAL CONNECTIONS ............ 15
2.2 CHECKING THE GATE .............................................. 16
2.3 INSTALLATION DIMENSIONS ................................... 16
2.4 PREPARING THE COUPLINGS ................................. 16
3. I
NSTALLATION
3.1 INSTALLATION OF BREATHER CAP ........................ 18
3.2 MOVEMENT CHECK.................................................. 18
3.3 ADJUSTMENTING THE THRUST FORCE (BY-PASS VALVES) .18
3.4 ADJUSTING THE HYDRAULIC SLOWING-DOWN IN CLOSING 18
3.5 ADJUSTING THE HYDRAULIC SLOWING-DOWN IN OPENING 18
3.6 CONCLUDING THE INSTALLATION ......................... 18
4. N
OTES FOR USERS AND MAINTENANCE TECHNICIANS
4.1 CORRECT USE OF THE OPERATOR ....................... 19
4.2 EMERGENCY RELEASE SYSTEM FOR MANUAL
OPERATION ............................................................... 19
4.3 ROUTINE MAINTENANCE ........................................ 19
4.4 TROUBLE-SHOOTING GUIDE .................................. 20
SAFETY STANDARDS AND INSTALLER OBLIGATIONS
INSTALLERS MUST PROCEED AS FOLLOWS TO CONFORM WITH SAFETY
:
STANDARDS
-
WEAR PROTECTIVE CLOTHING
,
GOGGLES GLOVES AND HELMET
-
DO NOT WEAR CLOTHING OR JEWELLERY THAT MAY BECOME TRAPPED
( , ,
TIES BRACELETS NECKLACES
A MOTORISED GATE IS A MACHINE AND AS SUCH MUST BE INSTALLED
IN ACCORDANCE WITH HEALTH AND SAFETY STANDARDS AND
.
LEGISLATION
BEFORE INSTALLATION A RISK ANALYSIS FOR THE SITE MUST
BE PERFORMED BY PROFESSIONALLY QUALIFIED PERSONNEL IN
ACCORDANCE WITH CURRENT LEGISLATION FOR MOTORISED GATES
EN 12453 EN 12445
RULES AND
REFER TO NATIONAL REGULATIONS AND LEGISLATION AS WELL AS THE
.
STANDARDS SPECIFIED
ONLY PROFESSIONALLY QUALIFIED PERSONNEL SHOULD INSTALL THE
.
PRODUCT
,
INSTALLATION ELECTRICAL CONNECTIONS AND SETTINGS MUST CONFORM
.
WITH CURRENT LEGISLATION
CAREFULLY READ THE INSTRUCTION MANUAL BEFORE INSTALLATION
INCORRECT INSTALLATION MAY BE A SOURCE OF HAZARDS
PACKAGING MUST BE DISPOSED OF IN ACCORDANCE WITH CURRENT
.
LEGISLATION DO NOT LITTER THE ENVIRONMENT
CHECK THAT THE PRODUCT AND PACKAGING ARE UNDAMAGED BEFORE
.
STARTING INSTALLATION
DO NOT INSTALL THE PRODUCT IN AREAS WHERE THERE IS A RISK OF
. ,
EXPLOSION GAS POWDERS AND FLAMMABLE FUMES REPRESENT A
.
HEALTH HAZARD
CHECK THAT ALL SAFETY MEASURES ARE TAKEN AND THAT PEOPLE
ARE PROTECTED FROM AREAS POSING A RISK OF CRUSHING
TRAPPING AND ANY OTHER HAZARD
LEGISLATION FOR MOTORISED GATES
THE INSTALLATION AREA MUST BE CORDONED OFF TO PREVENT ACCESS
BY UNAUTHORISED PERSONNEL
PROTECTION DEVICES MUST BE INSTALLED FOLLOWING RISK ANALYSIS
.
OF THE SITE CHECK THAT THE PROTECTION DEVICES ARE MARKED AND
THAT THEY FUNCTION IN ACCORDANCE WITH CURRENT LEGISLATION
THE DATA REQUIRED BY APPLICABLE LEGISLATION MUST BE CLEARLY
.
VISIBLE ON THE INSTALLATION
CHECK THAT THE MAINS POWER AVAILABLE IS COMPATIBLE WITH THE DATA
ON THE IDENTIFICATION PLATE BEFORE CONNECTING THE OPERATOR TO
.
THE MAINS POWER SUPPLY A SUITABLE DIFFERENTIAL OVERLOAD SWITCH
MUST BE INSTALLED UPSTREAM OF THE OPERATOR
THE MANUFACTURER OF THE OPERATOR DECLINES ALL RESPONSIBILITY
IF COMPONENTS ARE USED WHICH ARE INCOMPATIBLE WITH CORRECT
.
AND SAFE USE
THE INSTALLER MUST PROVIDE THE USER WITH ALL THE INFORMATION
NEED TO OPERATE THE DEVICE WITH PARTICULAR ATTENTION GIVEN
TO MANUAL OPERATION IN THE EVENT OF AN EMERGENCY AND ANY
.
RESIDUAL RISKS
( -
ACCIDENT PREVENTION FOOTWEAR
);
, .).
ETC
.
IN COUNTRIES OUTSIDE THE EU
.
.
,
CUTTING
,
IN ACCORDANCE WITH CURRENT
.
.
.
FORTY 5500
13
15
17
19
WARNINGS FOR THE USER
THE INSTRUCTIONS AND WARNINGS GIVEN BELOW ARE A VITAL AND
INTEGRAL PART OF THE PRODUCT
,
MUST BE GIVEN TO THE USER AND THEN READ CAREFULLY BECAUSE
THEY INCLUDE IMPORTANT WARNINGS FOR USE AND MAINTENANCE
INSTRUCTIONS MUST BE KEPT AND GIVEN TO ALL FUTURE USERS
THE OPERATOR MUST BE USED EXCLUSIVELY FOR THE PURPOSE
FOR WHICH IT IS DESIGNED
.
HAZARDOUS
KEEP AWAY FROM MOVING MECHANICAL PARTS
OPERATING RANGE OF THE DEVICE DURING OPERATION
TO OBSTRUCT THE MOVEMENT OF THE DEVICE AS SUCH ACTION MAY
: .
BE HAZARDOUS
KEEP CHILDREN AWAY FROM THE OPERATING RANGE OF THE DEVICE
.
AT ALL TIMES
KEEP REMOTE CONTROL AND OTHER CONTROL UNITS IN A SAFE PLACE
TO PREVENT USE BY CHILDREN OR UNAUTHORISED PEOPLE
IN THE EVENT OF ANY FAULTS DISCONNECT THE OPERATOR FROM
THE MAINS POWER SUPPLY USING THE MAIN SWITCH
.
REPAIR THE MAIN UNIT
. .
ASSISTANCE CENTRE FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN HAZARDOUS SITUATIONS
,
ALL MAINTENANCE INCLUDING CLEANING
.
QUALIFIED PERSONNEL
FOLLOW THE MANUFACTURER
PERSONNEL TO PERFORM ROUTINE MAINTENANCE
VERIFICATION OF CORRECT FUNCTIONING OF PROTECTION DEVICES
ENSURE CORRECT AND EFFICIENT FUNCTIONING OF THE OPERATOR
ALL REPAIRS AND MAINTENANCE MUST BE RECORDED ON THE
MAINTENANCE RECORD AND THEN MADE AVAILABLE TO THE USER
,
.
- 12 -
.
THE INSTRUCTIONS AND WARNINGS
.
ALL IMPROPER USE IS FORBIDDEN AND
.
KEEP AWAY FROM THE
.
CONTACT THE INSTALLER OR OTHER SPECIALIST
.
,
MUST BE PERFORMED BY
'
S INSTRUCTIONS AND REFER TO SPECIALIST
,
.
THE
.
.
DO NOT TRY
.
DO NOT TRY TO
PARTICULARLY
,
TO
.
.