Magnification Change - Optika Italy INSPECTION SYSTEMS Serie Manuel D'utilisation

9.5 Magnification change
1. Rotate the zoom adjustment ring ④ to change magnification
to the desired level. (Fig. 9)
• While rotating, the zoom ring clicks into fixed positions.
This is an indication that the standard magnification
positions are obtained.
Only for IS-01SMD
• By sliding the 3D attachment, the system allows a quick
switching between Straight view and 3D view. (Fig. 11)
• Once inserted into the light path, 3D attachment can be
rotated by 360° in order to obtain a oblique observation
of the whole specimen.
1. While looking on the monitor, rotate the 3D attachment until
the desired image is achieved.
Page 13
F ig. 11 F ig. 11